CBGTK - 1-CHLORO-3-NITROBENZENE, O-862
- MSDS: CBGTK
- Manufacturer: CHEM SERVICE INC
- Product Name: 1-CHLORO-3-NITROBENZENE, O-862
- National Stock Number: 6810-00N067929
Product Identification
Product ID:1-CHLORO-3-NITROBENZENE, O-862
MSDS Date:09/01/1988
FSC:6810
NIIN:00N067929
MSDS Number: CBGTK
Responsible Party
US
Emergency Phone: 215-692-3026
Info Phone: 215-692-3026
Cage: 84898
Contractor
Telephone: 610-692-3026
Cage: 8Y898
Ingredients
BENZENE, 1-CHLORO-3-NITRO-; (1-CHLORO-3-NITROBENZENE)
CAS: 121-73-3
RTECS: CZ0940000
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50(RAT):390 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONT LENSES SHOULD NOT BE WORN IN LAB.
ALL CHEMS SHOULD BE CONSIDERED HAZ-AVOID DIRECT PHYSICAL CONT! CAN
BE HARMFUL IF ABSORBED THROUGH THE SKIN AND INHALED. MAY BE FATAL
IF ABSORBED THROUGH THE SKIN , INHALED AND SWALLOWED! CAN CAUSE AN
ALLERGIC SKIN REACTION. CAN CAUSE AN ALLERGIC RESPIRATORY RXN.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:CAN CAUSE EYE AND SKIN IRRITATION.
CAN BE HARMFUL IF SWALLOWED. CAN BE IRRITATING TO MUCOUS MEMBRANES.
PROLONGED EXPOSURE MAY CAUSE NAUSEA/HEADACHE/DIZZINESS AND/OR EYE
DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:AN ANTIDOTE IS SUBSTANCE INTENDED TO COUNTERACT EFT OF POIS.
IT SHOULD BE ADMIN ONLY BY MD/TRAINED EMER PERS. MED ADVICE CAN BE
OBTAINED FROM POIS CTL CTR. EYES:FLUSH CONTINUOUSLY W/WATER FOR @
LST 15 MIN. SKIN:FLUSH W/WATER FOR 15-20 MIN.IF NO BURNS HAVE
OCCURRED-USE SOAP & WATER TO CLEANSE. INHAL:REMOVE TO FRESH AIR.
ADMIN OXYG IF PATIENT IS HAVING DFCLTY BRTHG. IF PATIENT HAS
STOPPED (SUP DAT)
Fire Fighting
Flash Point:217F,103C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:EVACUATE AREA. WEAR APPROPRIATE OSHA-REGULATED
EQUIPMENT. VENTILATE AREA. SWEEP UP AND PLACE IN AN APPROPRIATE
CONTAINER. HOLD FOR DISPOSAL. WASH CONTAMINATED SURFACES TO REMOVE
ANY RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE APPROP OSHA/MSMA APPRVD SFTY
EQUIP. AVOID CONT W/SKIN, EYES & CLTHG. KEEP TIGHTLY CLSD & STORE
IN COOL, DRY PLACE. STORE ONLY W/COMPATIBLE CHEMS.
Other Precautions:PERSONS NOT SPECIFICALLY & PROPERLY TRAINED SHOULD
NOT HNDL CHEM/ITS CNTNR. FURNISHED FOR LAB USE ONLY! MAY NOT BE
USED AS DRUGS, COSMETICS, AGRICULTURAL/PESTICIDAL PRODS, FOOD
ADDITIVES/AS HOUSEHOLD CHEMICALS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:THIS CHEMICAL SHOULD BE HANDLED ONLY IN A HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:BRTHG ADMIN ARTF RESP. IF EXHIBITING SIGNS OF SHOCK-KEEP
WARM & QUIET. GET MED ATTN IF NEC. IF IN CARDIAC ARREST ADMIN CPR.
CONTINUE LIFE SUPPORTING MEASURES UNTIL MED ASSISTANCE HAS AR
RIVED. INGEST:CONT MD IMMED . EYEPROT:FULL LENGTH FACE SHIELD .
Chemical Properties
Boiling Pt:B.P. Text:457F,236C
Melt/Freeze Pt:M.P/F.P Text:111F,44C
Spec Gravity:1.534
Solubility in Water:INSOL (IMMISCIBLE)
Appearance and Odor:AROMATIC ODOR. YELLOW CRYSTALLINE SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
COMBUSTIBLE. INCOMPATIBLE WITH STRONG BASES AND STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DECOMPOSITION LIBERATES TOXIC FUMES.
DECOMPOSITION PRODUCTS ARE CORROSIVE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.